Bateau Amorceur Fishing Surfer 2022

New LiFePo 12600mAh 9.6 Volt battery included.
Class 850 bait boat designed to face the waves and allow anglers to drop their lines and bait 150/200 meters from the shore without worrying.
The boat is equipped with a GPS system, so with the push of a button it returns to its starting point. Another feature of the GPS, 4 different release points are memorizable, with a push of a button, the boat will automatically join a memorized release spot.

Features :

        Length: 850mm
        Width: 205mm
        Height: 230mm
        Weight: 3.9kg
        Speed: 4 meters per second
        Powered by 2 Brushless motors with shrouded propellers

New LiFePo battery 12600mAh 9,6 Volts for a very long autonomy supplied with its charger, reference Z02S325120.

    Boat battery charge level displayed on the remote control
    2.4Ghz radio for interference-free operation
    Remote controlled bait release
    Hook under the hull to carry your lines to a long distance
    Blue and red lights for night use!
    Hull inspired by deep sea rescue boats, automatically resets in case of capsizing
    GPS system allows the boat to automatically return to the starting point at the touch of a button
    GPS system with memory of 4 release points, to send the boat automatically to the right position
    Wheel and underside of the hull with rubber protectors
    Cradle included
    Free carry bag!

FISHING SURFER WARNING
Please note that Fishing Surfers are often used in salt water for deep sea fishing. Salt water damages metal parts very easily if you do not use fresh water to rinse the parts after each trip. sea ​​fishing.
It is therefore imperative after each outing in salt water, even if it is only for a few minutes, to rinse all the exterior parts of the hull with clear water, in particular the propellers, propeller shafts and bearings, and the entire hull.
It is also imperative to open the deck hatch and check whether or not the parts in the hold, including the engines, have been in contact with salt water. In this case, it is imperative to evacuate the salt water that has penetrated the hull, to remove the excess salt with a cloth moistened with clean water and then to dry all the parts that have been in contact with the salt in order to prevent corrosion or deterioration of parts.

The company JOYSWAY and its distributor decline all responsibility in the event that these precautions are not respected and that parts of the boat are damaged in contact with salt water.
Engines and other spare parts that have been damaged by salt water are not guaranteed on this boat.