Nimh
Z03N5105S
A2PRO

NIMH-Akku für radiogesteuerte Gerätepakete RX S 6.0V/AAA-1000 JR

NIMH-Akku für radiogesteuerte Gerätepakete RX S 6.0V/AAA-1000 JR | Scientific-MHD
NIMH-Akku für radiogesteuerte Gerätepakete RX S 6.0V/AAA-1000 JR | Scientific-MHD
Pack Rx S 6.0V/AAA-1000 JR
Dimensions: 52 x 47 x 11 mm
Masse: 68 grs
13,46 € Bruttopreis
NIMH-Akku für radiogesteuerte Gerätepakete RX S 6.0V/AAA-1000 JR | Scientific-MHD

NIMH-Akku für radiogesteuerte Gerätepakete RX S 6.0V/AAA-1000 JR

Plus de details

NIMH-Akku für radiogesteuerte Gerätepakete RX S 6.0V/AAA-1000 JR

13,46 €
Versand innerhalb von 48 Stunden Versand innerhalb von 48 Stunden
352157 produkte auf Lager 352157 produkte auf Lager
Kundendienst Kundendienst
Sichere Bezahlung Sichere Bezahlung
Paiement CIC Paiement payplug Paiement fintecture
Verbundenes Universum
Pack RX S 6.0V/AAA-1000 JR
Abmessungen: 52 x 47 x 11 mm
Masse: 68 g
Packtypen
Empfangspakete
Batterientypen
Nimh Batterien
Arten von Ladegeräten
Batterien
Produkttypen
Akkumulatoren für Radio -kontrollierte Geräte
Anzahl der Zellen pro Batterie
5 Zellen pro Akku (5S)

Kunden, die diesen Artikel gekauft haben, kauften auch:

Produkte, die Ihnen gefallen könnten
Versand innerhalb von 48 Stunden
Versand innerhalb von 48 Stunden
Rückgabe und Umtausch innerhalb von 14 Tagen
Rückgabe und Umtausch innerhalb von 14 Tagen
150ml RC Lexan red bomb. Sold per unit.
\n
\nThe RC Lexan paintings were specially designed for the decoration of transparent lexan or polycarbonate bodies of RC cars. They apply from the inside of the body.\nThey resist fuel.
\n
\n to get the best result \n
  • 1) Always degrease the inside of the body \n
  • 2) Hide the areas that you do not want to paint \n
  • 3) Etage the paint bomb vigorously for 2 minutes \n
  • 4) Spray paint inside the body at a distance of 20 to 30cm above the surface in a thin uniform layer (always start with the darkest shade) < /li>\n
  • 5) Wait 5 minutes before passing another layer or withdraw the masking adhesives. \n
  • 6) At the end of the use, please put your head down down and press the nozzle to the paint stops, this will avoid the plug of the nozzle
\n Note: Fluo paintings have a drying time of 30 minutes and must always be covered with white back layers in order to obtain the fluorescent effect.\n
\n Danger mentions: \n
  • Repeated exposure can cause dryness or skin chapters. \n
  • Extremely flammable aerosol. \n
  • Pressure container: can break out under the effect of heat. \n
  • causes severe eye irritation. \n
  • can cause drowsiness or dizziness.
\n
\n Caution: \n
  • Hold out of heat, hot surfaces, sparks, bare flames and any other source of inflammation. Do not smoke. \n
  • Do not puncture or burn, even after use. \n
  • In case of contact with the eyes: rinse with precaution with water for several minutes. Remove the contact lenses if the victim bears it and if they can be easily removed. Continue to rinse. \n
  • If eye irritation persists: consult a doctor. \n
  • Store in a well -ventilated place. Maintain the container closed in a waterproof manner. \n
  • Protect solar radiation. Do not expose to a temperature above 50 ° C/122 ° F.