MiG-3-Kunststoffebene Modell

Ideal flight glasses ideal for the Hunter 250 MHDFLY or any other quad racer.\nFoxtech\'s new Skyzone FPV glasses have an external camera, high -resolution screens and a diversity type receiver.\n\nThese glasses have revolutionary features compared to other glasses on the market.\nThe manufacturing quality is very good. The screens are clear and the edges are well finished and they have an image resolution above most of the other glasses.\n\nThe advantages of \"diversity\" glasses;\n\nThe “diversity” system uses two different video receivers, and two different antennas.\nThis offers the opportunity to be more likely to get a good quality and unwelcome video signal.\nThe antennas are connected to an electronic “diversity” chip which selects the best video signal.\nYou can mount one of the antennas vertically and the other horizontally antenna.\nFor best results, you can also use other types of antennas.\nThis gives you the possibility of using a long directional antenna on one of the two receivers and an omnidirectional antenna on the other receiver. The “diversity” system will automatically choose which antenna receives the best signal at any time.\n\nThe external camera.\n\nThe external resolution camera 640x480 pixels has been added to allow you to do things without having to remove the glasses. When you have to remove the glasses, your eyes must get used to the ambient light. You must also put them on your head so that they do not fall.\nThe external camera allows you not to remove the glasses when you make small tasks as well as during the landing phase.\nThe lens on the external camera does not give the appearance that things are more distant than they really are.\n\nThe \"diversity\" module.\n\nIn these glasses is incorporated a \"diversity\" module comprising 8 channels on 4 strips in 5.8 GHz.\nThis allows you to use this module with most 5.8 GHz FPV transmitters like Foxtech, Dji, Walkera and many others.\n\nDouble receptors and double antennas\n\nThere are two 5808 type receptors in this set of glasses.\nThe device is delivered with two omnidirectional antennas of 50 ohms impedance and equipped with SMA type connectors.\n\nScreens.\n\nThe glasses are equipped with a double color screen of 854x480 pixels (WVGA) or 1229760 under pixels RGB colors (red, green, blue)\n\nControl by moving the head (head tracking).\n\nInside these glasses, there is a control system by displacement of the self -calibration head that uses a gyroscope.\n- Configuration by using a PPM track.\n- Adjustment of panoramic movement tracking.\n\nObservation: If you use the Futaba simulator socket you can power the glasses by it (in this case no external lipo battery is necessary).\n\nLipo battery supply.\n\nAn interesting feature with these glasses is that you can use almost all Lipo batteries to supply them.\nThe power supply accepts continuous voltages from 7V to 28V DC under 1 Ampère.\nA battery of two or three elements (2 or 3s) is a good choice!\n\nFOV (angle of field of vision).\n\nSkyzone glasses have a 30 ° vision angle (diagonally).\n\nDioptric lenses.\nGlasses also have removable optical lenses. These are sliding.\nA pair of non -corrective lenses is original. You can order corrective lenses to help improve near vision (Myopia).\nThis allows users who normally wear glasses to see far from using FPV glasses.\nPeople who only need reading glasses generally do not need correction lenses for these glasses.\nLentils sold for FatShark glasses also work for these glasses.\n\nThe whole understands:\n1 x FPV glasses,\n2 x reception antennas 5.8 GHz,\n1 x audio/video cable,\n1 x Futaba data cable,\n1 x JR data cable,\n1 x Wfly data cable,\n1 x power cable,\n1 x transport bag.\n